Remote Control Based Home Appliances

REMOTE CONTROL BASED HOME APPLIANCES

crossing DESIGN

CONTENTS

1. INTRODUCTION

2. PRODUCT DESCRIPTION

3. FUNCTIONAL BLOCK DIAGRAM

4. CIRCUIT DESCRIPTION

5. CIRCUIT DIAGRAM

6. LIST OF COMPONENTS

7. PCB LAYOUT

8. PCB FABRICATION

9. join PRACTICE

10. TESTING

11. APPLICATIONS

12. CONCLUSION

13. DATA SHEETS

14. REFERENCES

INTRODUCTION

Remote control for home appliances is an absolute demand in our fast-paced life. As a result, much grand has been given to this aspect and a range of opposed controls be prevalent today. One of the most common is that which makes use of IR radiations at particular frequencies.

Our product is a Remote Operated onwardice Appliance or Remote controlled Home appliance. The circuit is attached to any(prenominal) of the home appliances (lamp, fan, radio, etc) to make the appliance turn on/off from a TV, VCD, VCR, Air Conditioner or DVD remote control. The circuit can buoy be activated from up to 10 meters.



It is very easy to build and can be assembled on a general-purpose PCB.

The circuit essentially consists of a sender consisting of a 555 IC, the receiver consisting of an IR module, CD4017 IC, LEDs to allude the reception of the IR radiations, otherwise indicating the ON/OFF state, pass along and other components.

PRODUCT DESCRIPTION

Model Description

Connect this circuit to any of your home appliances (lamp, fan, radio, etc) to make the appliance turn on/off from a TV, VCD or DVD remote control. The circuit can be activated from up to 10 meters. The 38 kilocycle per second infrared (IR) rays generated by the remote control are genuine by IR receiver module TSOP1738 of the circuit. Pin 1 of TSOP1738 is connected to ground, pin 2 is connected to the power tally through resistor R5 and the siding is taken from pin 3. The output signal is...If you want to get a full essay, fellowship it on our website: Ordercustompaper.com



If you want to get a full essay, wisit our page: write my paper